A wooden floor can add character and warmth to any room, however there are a number of things that need to be considered when choosing your new wooden floor!
There are factors that should influence your choice of wooden floor You must bear in mind that, the construction of the floor you're working with pretty much will dictate what kind of wood you can use, you have two basic options to choose from...



Solid wood is what you generally think of as a hardwood floor, thick, solid planks of wood.
Engineered wood is made of a veneer layer that is laid on a core of plywood. This construction deals with moisture a bit better and is recommended for concrete slab subfloors.
Where you are installing the wood will limit your recommended options!
Installing hardwood floors on a second story is much different than doing so in a basement. A space beneath ground level is what’s known as below grade. A floor that’s even with the outside ground level is on grade, and any floors above this are above grade..
It is not recommended to put solid wood below grade, because the moisture coming up through the ground can cause problems, engineered wood is better suited!



Find out what kind of subfloor you have. The three most common types are concrete slab, plywood and particleboard. This will help you determine whether you can install solid wood floors, or if an engineered wood would be best!
If you have a concrete slab floor, we would recommend engineered wood!
You can get any type of wood in an engineered format, and the thickness of the
veneer on engineered wood varies. Higher-end engineered woods are no less
than solid woods in performance and price. Another option is to lay plywood
over the concrete, but due to the additional cost of plywood, insulation and labour, most people just choose to stick with what they have!
This is probably the most common subfloor and allows for the most versatility with hardwood floors. You can nail solid wood on top or use engineered wood.
This material was commonly used under carpet in homes built in the 1970s. It’s basically a cheaper version of plywood. For hardwood floors, you'll need to replace the particleboard with plywood. Then you can add engineered or solid wood